帕智電子(上海)有限公司

                400 0800 882

                產品中心

                當前位置:首頁 > 產品中心 > 圣邦微 > 負載開關 > SGM2553E

                產品中心

                SGM2553E

                SGM2553E
                Precision Adjustable Current Limited Power Distribution Switch
                 
                Precision Adjustable Current Limited Power Distribution Switch
                GENERAL DESCRIPTION

                The SGM2553E power distribution switch is intended for applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered and provides up to 0.2A of continuous load current. This device offers a programmable current limit threshold between 100mA and 200mA via an external resistor. The power switch rise and fall times are controlled to minimize current surges during turn on/off. The SGM2553E has quick auto-discharge function in disable status.

                SGM2553E device limits the output current to a safe level by using a constant-current mode when the output load exceeds the current limit threshold. An internal reverse-voltage comparator disables the power switch when the output voltage is driven higher than the input to protect device on the input side of the switch. The nFAULT output asserts low during over-current, thermal shutdown and reverse-voltage conditions.

                SGM2553E is available in a Green TDFN-2×2-6L package. It is rated over the -40 to +85 temperature range.

                PIN CONFIGURATIONS

                Snap10.png

                FEATURES
                • Up to 0.2A Maximum Load Current

                • Meets USB Current Limiting Requirements

                • Adjustable Current Limit: 100mA to 200mA

                • 90mΩ High-side MOSFET

                • No Reverse Leakage Current of High-side MOSFET

                • Reverse Input-Output Voltage Protection

                • Operating Range: 2.5V to 5.5V

                • Built-In Soft-Start Function

                • Quick Auto-Discharge in Disable Status

                • Evaluated to IEC 60950-1, Ed 2, Am1, Annex CC, Test Program 1 with CB Report

                • Available in a Green TDFN-2×2-6L Package

                APPLICATIONS

                USB Ports/Hubs

                Digital TV

                Set-Top Boxes

                VOIP Phones


                ORDERING INFORMATION
                Part NumberStatusPackagePinsPb-FreeTemp Range
                SGM2553EYTDI6G/TRProductionTDFN-2×2-6L6Y-40℃ to +85℃Samples

                网上赚钱最可靠的10种方法