The SGM2553 and SGM2553D power distribution switches are intended for applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered and provide up to 1.5A of continuous load current. These devices offer a programmable current limit threshold between 100mA and 1.7A via an external resistor. The power switch rise and fall times are controlled to minimize current surges during turn on/off. The SGM2553D has quick auto-discharge function in disable status.
SGM2553 and SGM2553D devices limit the output current to a safe level by using a constant-current mode when the output load exceeds the current limit threshold. An internal reverse-voltage comparator disables the power switch when the output voltage is driven higher than the input to protect devices on the input side of the switch. The FAULT output asserts low during over-current, thermal shutdown and reverse-voltage conditions.
SGM2553 and SGM2553D are available in Green TDFN-2×2-6L and SOT-23-6 packages. They are rated over the -40℃ to +85℃ temperature range.
Up to 1.5A Maximum Load Current
Meets USB Current Limiting Requirements
Adjustable Current Limit: 100mA to 1.7A
Fast Over-Current Response: 2μs
90mΩ High-side MOSFET
No Reverse Leakage Current of High-side MOSFET
Reverse Input-Output Voltage Protection
Operating Range: 2.5V to 5.5V
Built-In Soft-Start Function
Quick Auto-Discharge in Disable Status (SGM2553D)
Evaluated to IEC 60950-1, Ed 2, Am1, Annex CC, Test Program 1 with CB Report
Available in Green TDFN-2×2-6L and SOT-23-6 Packages