帕智電子(上海)有限公司

                400 0800 882

                產品中心

                當前位置:首頁 > 產品中心 > 圣邦微 > LED驅動器 > 白光LED 驅動器 > SGM31324

                產品中心

                SGM31324

                I2C Programmable RGB LED Driver with Auto Blink Mode
                 
                I2C Programmable RGB LED Driver with Auto Blink Mode
                GENERAL DESCRIPTION

                The SGM31324 is a fully programmable, constant current RGB LED driver with a flexible control interface. The device is ideally powered from 1-cell Lithium-Ion/ Polymer, 3-cell NiCd/NiMH/Alkaline batteries, or systems with 3.3V or 5V supplies. It provides 3 independent programmable constant current sinks without requiring any external components.
                With an on-chip timing control unit, LED blink rate, fade-in and fade-out are user-adjustable resulting in unique color lighting patterns.
                Ten internal registers are programmed via the I2C control interface with a built-in decoder allowing individual control of the LED channels’ ON/OFF state and current level. A total of 192 current levels are available for each channel from 0.125mA to 24mA with a 0.125mA step.
                An Auto Blink mode automatically turns on and off LED1 (on D1 pin) at 8mA every 2s after EN pin goes high. In this mode, a phone with a discharged battery connected to a charger can have LED1 blink to notify that the battery is charging.
                In shutdown mode, the quiescent current is reduced to less than 1μA.
                The device is available in Green UTDFN-1.5×1.5-8L package. It operates over an ambient temperature range of -40 to +85.

                PIN CONFIGURATIONS

                image.png

                FEATURES
                • Ultra Low Dropout Regulated 3-CH Current Sinks

                    30mV (TYP) at 10mA per Channel

                • Programmable LED Setting by I2C Compatible Interface

                • Individual Channel Control

                    ON/OFF Interval Time Control

                    Dimming Up/Down Time

                    RGB LED Color Control

                • 192 Current-Level Setting

                    0.125mA ~ 24mA, 0.125mA Step

                • Auto Blink LED1 (D1 Pin) Mode
                    Blinking Period: 2s
                    Current Setting: 8mA

                • No Noise, Non-Pulsating LED Current

                • Fast, Smooth Start-Up

                • Input Voltage Range: 2.5V to 5.5V

                • Less than 1μA Shutdown Current

                • -40 to +85 Operating Temperature Range

                • Available in Green UTDFN-1.5×1.5-8L Package

                APPLICATIONS

                RGB Indicator LEDs
                Mobile Phones and Handheld Devices
                Digital Cameras

                ORDERING INFORMATION
                Part NumberStatusPackagePinsPb-FreeTemp Range
                SGM31324YUDW8G/TRProductionUTDFN-1.5×1.5-8L8Y-40℃ to +85℃






                 

                网上赚钱最可靠的10种方法