帕智電子(上海)有限公司

                400 0800 882

                產品中心

                當前位置:首頁 > 產品中心 > 圣邦微 > 馬達驅動 > SGM42600

                產品中心

                SGM42600

                Dual H-Bridge Motor Driver
                 
                Dual H-Bridge Motor Driver
                GENERAL DESCRIPTION

                The SGM42600 provides a dual bridge motor driver solution for battery-powered toys, printers and other low-voltage or battery-powered motion control applications. The device has two H-bridge drivers, and can drive two DC brush motors, a bipolar stepper motor, solenoids, or other inductive loads.

                The output driver block of each H-bridge consists of N-channel power MOSFETs configured as an H-bridge to drive the motor windings. Each H-bridge includes circuitry to regulate or limit the winding current.

                With proper PCB design, each H-bridge of the SGM42600 is capable of driving up to 1.5A RMS (or DC) continuously, at +25 with a VCC supply of 5V. It can support peak currents of up to 2A per H-bridge. Current capability is reduced slightly at lower VCC voltages.

                Internal shutdown functions with a fault output pin are provided for H-bridge over-current protection, power supply under-voltage lockout, charge pump under-voltage lockout and over-temperature protection. If one of fault conditions happens, the SGM42600 would prevent each input PWM signal from driving H-bridge and H-bridge is in high impedance status.

                A low-power sleep mode is also provided to save power dissipation. If nSLEEP is low, the SGM42600 will enter into sleep state.

                The SGM42600 is available in Green TQFN-4×4-16L and TSSOP-16 (Exposed Pad) packages. It operates over an ambient temperature range of -40 to +125.

                PIN CONFIGURATIONS

                Snap3.png   Snap4.png

                FEATURES
                • Dual H-Bridge Current-Controlled Motor Driver Capable of Driving Two DC Motors or One Stepper Motor

                • Low MOSFET On-Resistance: HS + LS 410mΩ

                • Output Current 1.5A RMS, 2A Peak per H-Bridge (at VCC = 5V, +25

                • 2.7V to 24V Wide Power Supply Voltage Range

                • PWM Winding Current Regulation/Limiting

                • Fault Indication Output

                • Available in Green TSSOP-16 (Exposed Pad) and TQFN-4×4-16L Packages

                APPLICATIONS

                Battery-Powered Toys

                POS Printers

                Video Security Cameras

                Office Automation Machines

                Gaming Machines

                Robotics

                ORDERING INFORMATION
                Part NumberStatusPackagePinsPb-FreeTemp Range
                SGM42600XTQE16G/TRProductionTQFN-4×4-16L16Y-40℃ to +125℃
                SGM42600XPTS16G/TRProductionTSSOP-16 (Exposed Pad)16Y-40℃ to +125℃

                网上赚钱最可靠的10种方法